Surface Area: 7.2 m 2/g
Particle Size (d50): 0.36 µm
Nominal Composition: La0.90MnO3-d

Surface Area: 220 m2/g 
Nominal Composition: Sm0.15Ce0.85O2-d

Powder suitable for tape casting, ink manufacture, pellet pressing and other non-aqueous manufacturing processes

Formulation: Various available
Surface Area: Various available

Available sizes: 2.05 diameter

Available sizes: 20 mm, 25 mm, 32 mm, 50 mm, 5.08 x 5.08 cm2 squares with rounded corners

Production Rate: 500 or 1000 Nl/h
Delivery Pressure: 15 - 30 bar
Purity: 99.4%
Water Consumption: 0.5 or 1.0 l/h

Production Rate: 100 or 200 Nl/h
Delivery Pressure: 15 - 30 bar
Purity: 99.4%
Water Consumption: 0.1 or 0.2 l/h

Technology: SOFC Electrolyte Powder
Formulation: La_0.80 Sr_0.20 Ga_0.80 Mg_0.20 O_3-
Surface Area: 4-8 m²/g
Particle Size (d50): 0.3 to 0.6 µm.

Power: 4kW
Fuel: Hydrogen
Applications: UPS, Backup Power, Remote Power

Power: 2kW
Fuel: Hydrogen
Applications: UPS, Backup Power, Remote Power

Power: 200, 340 & 470 W
Fuel: Hydrogen
Features: Stack can be taken apart and rebuilt to change MEAs or insert sensors, Bipolar plates have built-in gaskets, Stack power can easily be scaled by adding/removing cells

Technology: SOFC
Characteristics: Strong, Shock Tolerant & Good Thermal Cycling
Applications: SOFC Design and Development

Power: 1 - 3kW
Fuel: Hydrogen
Applications: APU's, Forklifts, Vehicles, Backup Power and Stationary Power

Power: 200W to 5kW
Fuels: Hydrogen, Reformate
Applications Small Vehicles, Battery Charging, Backup Power, Research

Power: 200W - 1.2kW
Fuel: Hydrogen, Reformate
Applications: Small Vehicles, Battery Charging, Backup Power, Research

Delivery Pressure: 30 bar (435 psi)
Production Rates: 10, 20 & 30 Nm3/hr
Applications: Hydrogen Fueling Stations. Forklifts to Buses

Technology: SOFC Cathode Powder
Surface Area: 12.0 +/- 2.0 m2/g
Particle Size: 0.30 +/- 0.20 µm.
Formulation: Mn_1.5 Co_1.5 O_4-

Technology: SOFC Cathode Powder
Surface Area: 12.0 +/- 2.0 m2/g
Particle Size: 0.30 +/- 0.20 µm.
Formulation: La_0.60 Sr_0.40 Fe O_3-d

Power: Max 5kW
Fuels: Diesel, Petrol, Biofuels
Applications: Telecoms, Backup Power, APUs/Range Extenders, Marine

Fuels: Diesel, LPG, Methanol, Propane

Technology: PEMFC, Direct Ethanol FC, DMFC, Direct Glycerol FC, Electrolysers and Ammonia Rewforming

Technology: PEMFC and DMFC
Applications: Portable, Automotive and Stationary
Characteristics: Improves stack efficiency and durability, Compatible with 5 layer MEA's

Technology: PEM Single Cells
Active Area: 5 to 50cm˛
Compression Force Range: 500 - 10,000N

Technology: SOFC Electrolyte Powder
Surface Area: 12.0 +/- 2.0 m2/g
Particle Size: 0.30 +/- 0.20 µm.
Formulation: La_0.60 Sr_0.40 Co_0.20

Technology: SOFC Electrolyte Powder
Surface Area: 12.0 +/- 2.0 m2/g
Particle Size: 0.30 +/- 0.20 µm.
Formulation: La_0.80 Sr_0.20 Mn_O3-

Technology: SOFC Electrolyte Powder
Surface Area: 12.0 +/- 2.0 m2/g
Particle Size: 0.30 +/- 0.20 µm.
Formulation: Sm_0.20 Ce_0.80 O_2-

Technology: SOFC Electrolyte Powder
Surface Area: 12.0 +/- 2.0 m2/g
Particle Size: 0.30 +/- 0.20 µm.
Formulation: Gd_0.10 Ce_0.90 O_2-

Technology: SOFC, HTPEM, PEM, PAFC and MCFC
Characteristics: Managment of problematic temperature variations
Applications: Heat Exchangers, Insulation and Manifolding

Technology: PEM, DMFC and HTPEM
Applications: Fuel Cell Stack Design

Technology: SOFC
Characteristics: Strong, Shock Tolerant, Good Thermal Cycling & Thin (50µm)
Applications: SOFC Design and Development

Technology: Electrolysers, Hydrogen
Control System: Dew Point, Purity and Pressure

Technology: SOFC Cathode Powder
Surface Area: 5-9 m2/g
50% by weight (La_0.8 Sr_0.2) Mn 0_3-x
50% by weight (Y₂O₃)_0.08(ZrO₂)_0.92

Technology: SOFC Electrolyte Powder
Surface Area: 8-11 m2/g
Particle Size (d50): 0.5-0.7 µm
Formulation: (ZrO₂)_0.90 (Sc₂ O₃)_0.10

Technology: SOFC Electrolyte Powder
Surface Area: >100 m2/g
Primary crystallite size: 5-10 nanometers
Secondary particle size: softly agglomerated
Formulation: Gd_0.10 Ce_0.90 O_2-

Technology: SOFC Paste
Formulation: (La_0.60 Sr_0.40)_0.995 (Co_0.20

Technology: SOFC Innterconnect Sheets
Dimensions: 100 mm x 100 mm, 170 mm x 170 mm

Applications: Reducing Ink/Paste viscosity for brush-painting, spraying or other reduced viscosity deposition methods

Platinum Content: Minimum 70% by weight
Technology: SOFC Inks

Technology: SOFC Anode Powder Surface Area: 3-7 m2/g
Partial Size: d50 .5 - 1.5 micrometers

Technology: SOFC Interconnects
Dimensions: 40 x 40 mesh x 0.13 mm wire diameter, 100 mm square, 40 x 40 mesh x 0.13 mm wire diameter, 150 mm square

Technology: SOFC Electrolyte Powder
Surface Area: >100 m2/g
Primary crystallite size: 5-10 nanometers
Secondary particle size: softly agglomerated
Formulation: Gd_0.10 Ce_0.90 O_2-

Gold Content: Minimum 70% by weight
Technology: SOFC Inks

Technology: SOFC Electrolyte Powder
Surface area: 10-12 m2/g
Particle Size: (d50): 0.5 to 0.7 µm
Formulation: (Sc₂O₃)_0.1(CeO₂)_0.01(ZrO2)_0.89

Technology: SOFC Cathode Paste
Formulation: 50% by weight (La0.60 Sr0.40) (Co0.20 Fe0.80) O3-x, 50% by weight (Ce0.9Gd0.1) O1.95 Solids content is 65-75 % by weight

Technology: SOFC Cathode/Anode Powder
Formulation: (Y₂O₃)_0.08 (ZrO₂)_0.92
Surface area: >100 m2/g
Primary crystallite size: 5-10 nanometers
Secondary particle size: softly agglomerated

Technology: SOFC Interconnect Coating
Surface area: 4-8 m2/g
Particle size: d50 0.3 – 0.7 micrometers

Technololy: SOFC Electrolyte Powder
Formulation: Gd_0.10 Ce_0.90 O_2-
Surface area: 5-8 m2/g
Particle Size (d50): 0.3 to 0.5 µm

Technology: SOFC Electrolyte Powder
Formulation: Gd_0.10 Ce_0.90 O_2-
Surface area: 30-40 m2/g
Particle Size (d50): 0.3 to 0.5 µm

Technology: SOFC Cathode Paste
Formulation:50% by weight (La_0.80 Sr_0.20) Mn 0_3-x, 50% by weight (Y₂O₃)_0.08(ZrO₂)_0.92
Solids content is 60-70 % by weight