5 cm x 5 cm anode support
4 cm x 4 cm cathode active area
NiYSZ Anode thickness ~220-260 microns
YSZ-8 Electrolyte thickness ~6-8 microns
LSCF/LSCF-GDC Cathode thickness ~40-60 microns
|
|
|
|
.png "GDC Substrates")
Available sizes: 2.05 diameter
|
|
|
|
Available sizes: 20 mm, 25 mm, 32 mm, 50 mm, 5.08 x 5.08 cm2 squares with rounded corners
|
|
|
|
.gif "ThinE-Strate™ for SOFC")
Technology: SOFC
Characteristics: Strong, Shock Tolerant & Good Thermal Cycling
Applications: SOFC Design and Development
|
|
|
|
Technology: Hydroforming of flow channels
Applications: Metallic bipolar plates for PEM, SOFC (interconnects), DMFC, heat exchangers and electrolysers
|
|
|
|
Technology: PEMFC, Direct Ethanol FC, DMFC, Direct Glycerol FC, Electrolysers and Ammonia Rewforming
|
|
|
|
Technology: PEMFC and DMFC
Applications: Portable, Automotive and Stationary
Characteristics: Improves stack efficiency and durability, Compatible with 5 layer MEA's
|
|
|
|
Technology: SOFC, HTPEM, PEM, PAFC and MCFC
Characteristics: Managment of problematic temperature variations
Applications: Heat Exchangers, Insulation and Manifolding
|
|
|
|
Technology: PEM, DMFC and HTPEM
Applications: Fuel Cell Stack Design
|
|
|
|
Technology: SOFC
Characteristics: Strong, Shock Tolerant, Good Thermal Cycling & Thin (50µm)
Applications: SOFC Design and Development
|
|
|
|
Technology: SOFC
Size: up to 355 x 255 mm
Thickness: 6.35 mm
Applications: SOFC Component Manufacturing
|
|
|
|
Technology: SOFC Innterconnect Sheets
Dimensions: 100 mm x 100 mm, 170 mm x 170 mm
|
|
|
|
.jpg "Platinum Ink (Pt-I-10)")
Platinum Content: Minimum 70% by weight
Technology: SOFC Inks
|
|
|
|
.jpg "Nickel Metal Mesh for Current Collection (Ni-Mxx)")
Technology: SOFC Interconnects
Dimensions: 40 x 40 mesh x 0.13 mm wire diameter, 100 mm square, 40 x 40 mesh x 0.13 mm wire diameter, 150 mm square
|
|
|
|
.jpg "High Temperature SOFC Sealing Paste (CAP-552)")
Applications: Recommended for gas-tight,hard-bonding SOFC cells to metals and ceramics and can be used in both button cell testing and stack development. It has the best rating for bonding to Ni-Fe metal alloys
|
|
|
|
.jpg "Gold Ink (Au-I-10)")
Gold Content: Minimum 70% by weight
Technology: SOFC Inks
|
|
|
|
Technology: SOFC Interconnect Coating
Surface area: 4-8 m2/g
Particle size: d50 0.3 – 0.7 micrometers
|
|
|
|
Technology: SOFC Sealing
Compressibility at 0.06 MPa (8 psi): ~20%
Density @0.06 MPa: 0.19 g/cc
Contain an organic binder ~5%
Maximum use temperature 1650°C
|
|
|
|
.jpg "Silver Ink (Ag-I-10)")
Formulation: Minimum 70 % Silver by weight
|
|
|
|
Technology: SOFC Sealing
|
|
|
|
.jpg "NextCell™ Electrolyte Supported Button Cell (NEXTCELL-B)")
Technology: SOFC Button Cell
Sizes: 20, 25, 28 & 32 mm
|
|
|
|
.jpg "Silver Current Collecting Mesh (Ag-M40-100)")
Technology: SOFC Interconnects
Dimensions: 40 x 40 mesh x 0.11 mm wire diameter, 100 mm square sheet.
|
|
|
|
.jpg "Flexible Mica Paper for Sealing (MPS-)")
Technology: SOFC Sealing
Options: 170mm x 170mm x .50mm, 170mm x 170mm x .25mm, 100mm x 100mm x .50mm, 100mm x 100mm x .25mm
|
|
|
|
Technology: Heat Exchanger Components
|
|
|
|
Technology: Heat Exchanger Components
|
|
|
|
.jpg "NextCell™ Electrolyte Supported Cell, 5cm square (NEXTCELL-5S)")
Technology: SOFC Button Cell
Specs: 5 x 5 cm Cells, 4 x 4 cm active area
|
|
|
|
Technology: Heat Exchanger Components
|
|
|
|
Technology: Heat Exchanger Components
|
|
|
|
Technology: Heat Exchanger Components
|
|
|
|
Technology: SOFC Button Cell
Specs: 20 mm and 27 mm diameter button cells, NiYSZ-8 Anode thickness - 220-260 microns, YSZ-8 Electrolyte thickness - 6-10 microns, LSM/LSM-GDC Cathode thickness - 30-50 microns
|
|
|
|
Technology: SOFC Single Cell
Specs: 20, 25, 28 and 32 mm
|
|
|
|
Technology: SOFC Single Cell
Specs: 10 cm x 10 cm square cells with 9 cm x 9 cm active electrode areas, Zirconia-based Hionic electrolyte is 120 microns thick, LSM/LSM-GDC cathode system is 50 microns thick, Ni-YSZ/Ni-GDC anode system is 50 microns thick
|
|
|
|
Technology: SOFC Electrode Cell
Specs: 20, 25, 28 and 32 mm
|
|
|
|
.jpg "Anode-Electrolyte Bilayers Button Cell (AEB-)")
Technology: SOFC Anode Materials
Specs: 20 mm and 27 mm diameter button cells, NiYSZ-8 Anode thickness - 220-260 microns, YSZ-8 Electrolyte thickness - 6-10 microns
|
|
|
|