Packaging: Cartridges, Bottles, Cans, Drums and Tankers
Applications: Portable, Stationary, Automotive and Biofuels
|
|
|
|
Technology: SOFC Anode/Cathode Powder
Formulation: Gd0.10 Ce0.90 O2- Surface area: 30-40 m2/g Particle Size (d50): 0.3 to 0.5 µm
|
|
|
|
This PV solar panel has superb durability to withstand rigorous operating conditions. Tianwei solar modules have a module efficiency of up to 14.44%.
Dimensions (mm): 1640x992x40
Nominal Output (Wp): 235
|
|
|
|
Technology: SOFC Cathode Powder
Formulation: 50% by weight (La0.60 Sr0.40) (Co0.20 Fe0.80) 03-x, 50% by weight (Ce0.9Gd0.1)O1.95 Surface area 3-7 m2/
|
|
|
|
- Gases: Default Air, Ar, and H2. Others by order or flow conversion factors.
- Flow control and readout: "red-y" units with manual needle valve, thermal mass flow measurement, and internal battery.
- Measurement range: Default 1-50 ml/min. Others on order.
|
|
|
|
Technology: SOFC Cathode Paste
Formulation:50% by weight (La0.80 Sr0.20) Mn 03-x, 50% by weight (Y2O3)0.08(ZrO2)0.92 Solids content is 60-70 % by weight
|
|
|
|
Technology: SOFC Anode/Cathode Powder
Formulation: Gd0.10 Ce0.90 O2- Surface area: 5-8 m2/g Particle Size (d50): 0.3 to 0.5 µm
|
|
|
|
Technology: SOFC Electrolyte Powder
Surface area 13-19 m2/g
|
|
|
|
Staffing solutions: Direct hire, Contract employees, Contract-to-hire, Outplacement services, Nationwide search
|
|
|
|
Delivery pressure: 350 bar (700 bar optional) Production rates: 50kg/day
Applications: Fleet Vehicles, Govt Vehicles, Delivery Vans, General Purpose Vehicles, Forklifts / Material Handling
|
|
|
|
Technology: PSA
Output Pressure: 0 to 7 barg (15 to 100 psig)
Flow Rate: 40 SLPM 40 SLPM 100 SLPM
Applications: Laboratory Nitrogen Gas Generator, LC-MS E, sample preparation
|
|
|
|
Tianwei PV solar panels have superb durability to withstand rigorous operating conditions. This solar module is made of polycrystalline silicon solar cells with module efficiency of up to 12.16%.
Dimensions (mm): 1495x995x45
Nominal Output (Wp): 200
|
|
|
|
Technology: SOFC Anode Powder
Surface Area: Not more than 1 m2/g Partial Size: d50 12-22 microns
|
|
|
|
Contains: NextCell&trade 20 mm button cells, 20 mm diameter YSZ substrates, Additional 18 mm gold ring seals, Ni metal paste, LSM cathode paste
|
|
|
|
Technology: PEMFC and DMFC
Applications: Portable, Automotive and Stationary
Characteristics: Improves stack efficiency and durability, Compatible with 5 layer MEA's
|
|
|
|
Technology: Oil Free Piston Compressor
Output Pressure: 0 to 8 barg (0 to 115 psig)
Flow Rate: 20 SLPM
Applications: Laboratory Air Compressor
|
|
|
|
Technololy: SOFC Electrolyte Powder Formulation: Gd0.10 Ce0.90 O2- Surface area: 5-8 m2/g Particle Size (d50): 0.3 to 0.5 µm
|
|
|
|
Applications: SOFC Material & Component Testing
|
|
|
|
Technology: Fuel Processing Catalyst
Specs: Reforming of Methanol at 200 - 300°C.
|
|
|
|
Technology: SOFC Testing
|
|
|
|
Production Rate: 100 or 200 Nl/h
Delivery Pressure: 15 - 30 bar
Purity: 99.4%
Water Consumption: 0.1 or 0.2 l/h
|
|
|
|
Power: 1 - 10kW
Fuel: Hydrogen
Applications: Telecoms, Backup Power, Data Centres, Base Stations and UPS
|
|
|
|
Applications: Forklift Trucks, APUs, Marine
|
|
|
|
Technology: PSA
Output Pressure: 0 - 7 barg (0 to 100 psig)
Flow Rate: 3 SLPM
Applications: GC-ICP
|
|
|
|
Delivery pressure: up to 13.8 & 11.7 bar
Production rates: 600 & 1000 cc/min
Applications: Laboratories, Universities
|
|
|
|
Technology: SOFC Innterconnect Sheets
Dimensions: 100 mm x 100 mm, 170 mm x 170 mm
|
|
|
|
Technology: SOFC
Characteristics: Strong, Shock Tolerant, Good Thermal Cycling & Thin (50µm)
Applications: SOFC Design and Development
|
|
|
|
Upper temperature: 1100°C
Voltage: 208V standard; 110V optional
Power: 1290 W (~6A @ 208V)
|
|
|
|
Technology: SOFC Anode Materials
|
|
|
|
Technology: PSA
Output Pressure: 0 to 6 barg / 0 to 87 psig
Flow Rate: 500 cc / min
Applications: GC (Carrier Gas, Make-up, ECD), Circular dichroism and Thermo Analysis
|
|
|
|
Power: 200, 340 & 470 W
Fuel: Hydrogen
Features: Stack can be taken apart and rebuilt to change MEAs or insert sensors, Bipolar plates have built-in gaskets, Stack power can easily be scaled by adding/removing cells
|
|
|
|
Technology: PEM Single Cells & Stacks
Power Range: Up to 300W
Measurements: Voltage, Current, Mass Flow, Temperature and Humidity
|
|
|
|
Technology: SOFC Anode/Cathode Materials
Specs: 2mm diameter, 3-4mm long
|
|
|
|
Technology: SOFC Electrolyte Powder
Surface Area: >100 m2/g
Primary crystallite size: 5-10 nanometers
Secondary particle size: softly agglomerated
Formulation: Gd0.10 Ce0.90 O2-
|
|
|
|
Tianwei PV solar panels have superb durability to withstand rigorous operating conditions. This Tianwei solar module has a module efficiency of up to 10.94%.
Dimensions (mm): 1580x808x40
Nominal Output (Wp): 180
|
|
|
|
5 cm x 5 cm anode support 4 cm x 4 cm cathode active area NiYSZ Anode thickness ~220-260 microns YSZ-8 Electrolyte thickness ~6-8 microns LSCF/LSCF-GDC Cathode thickness ~40-60 microns
|
|
|
|
Power: 2kW
Fuel: Hydrogen
Applications: UPS, Backup Power, Remote Power
|
|
|
|
Delivery Pressure: 15 & 30 bar (218 & 435 psi)
Production Rates: 6 Nm3/hr
Applications: Hydrogen Fueling Stations. Forklifts to Buses
|
|
|
|
Subject Areas: Fuel Cells and Hydrogen
Language: German
Frequency: Quarterly
|
|
|
|
Technology: SOFC Interconnects
Dimensions: 40 x 40 mesh x 0.11 mm wire diameter, 100 mm square sheet.
|
|
|
|
Delivery pressure: 15 bar
Production rates: 10 slpm
Applications: Energy Storage, Backup Power
|
|
|
|
Technology: SOFC Anode Powder
Composition: 66% NiO - 34% YSZ8 by weight Surface Area: 4-8 m2/g
|
|
|
|
Technology: SOFC Button Cell
Sizes: 20, 25, 28 & 32 mm
|
|
|
|
Technology: Fuel Processing Cataylst
|
|
|
|
Technology: SOFC
Facilities: Formulation, Protoyping, Tape Casting, Substrate Dispensing, Coatings, Air Firing and Custom Components
|
|
|
|
Technology: SOFC Electrolyte Powder
Formulation: La0.80 Sr0.20 Ga0.80 Mg0.20 O3- Surface Area: 4-8 m2/g Particle Size (d50): 0.3 to 0.6 µm.
|
|
|
|
Technology: PEM and Hydrogen Infrastructure
Characteristics: Reliable, Quantitative, No False Positives, Insensitive to Humidity, High Selectivity, Rapid Response & Recovery
|
|
|
|
Options: 18 or 23 mm
|
|
|
|
Technology: PEM, DMFC and HTPEM
Applications: Fuel Cell Stack Design
|
|
|
|
Technology: SOFC Cathode Paste
Formulation: 50% by weight (La0.60 Sr0.40) (Co0.20 Fe0.80) O3-x, 50% by weight (Ce0.9Gd0.1) O1.95
Solids content is 65-75 % by weight
|
|
|
|