HOGEN® HP High Pressure Electrolyzers for Fuel Cell Backup Power

FEATURES

2400 psi H2 output
Caustic free
Compressor free
Low maintenance
Fully automated

The HOGEN HP is a revolutionary high pressure hydrogen generator for fuel cell backup power systems, used to recharge the hydrogen storage depleted during a power outage.

When grid power is available, the HOGEN HP recharges the hydrogen storage.

When grid power is lost, the stored hydrogen is directed to a fuel cell, which provides backup power to the load.

SPECIFICATION SUMMARY

	HOGEN HP 10	HOGEN HP 40
ELECTROLYTE
Proton Exchange Membrane (PEM) - Caustic - Free
HYDROGEN PRODUCTION
Net Production Rate:
Nm3/hr @ 0° C, 1 bar	0.26 Nm3/hr	1.05 Nm3/hr
SCF/hr @ 70° F, 1 atm	10 SCF/hr	40 SCF/hr
SLPM @ 70° F, 1 atm	4.7 SLPM	18.8 SLPM
kg per 24 hours	0.57 kg/24hr	2.28 kg/24hr
Delivery Pressure - Nominal	165 barg (2400 psig)
Purity (Concentration of Impurities)	99.995% (Water Vapor < 34 ppm (V) Water, -50°C (-58°F) Dewpoint, N2 < 2 ppm, O2 < 1 ppm, All Others Undetectable)
DI WATER REQUIREMENT
Rate at Max Consumption Rate	0.24 L/hr (0.06 gal/hr)	0.94 L/hr (0.25 gal/hr)
Temperature	5°C to 35°C (41°F to 95°F)
Pressure	1.5 to 4 barg (21.8 to 58 psig)
Input Water Quality	ASTM Type II Deionized Water required, < 1 micro Siemen/cm (>1 megOhm-cm) ASTM Type I Deionized Water preferred, < 0.1 micro Siemen/cm (> 10 megOhm-cm)
ELECTRICAL
	208 to 240VAC, single phase, 50/60 Hz
ENVIRONMENT
	Air cooled. Indoor, 5 to 40°C (41°F to 104°F), to 1520 m (5000ft) Non-hazardous/classified, vent area per IEC60079-10 Zone 2 NE
DESIGN STANDARDS
	Designed to UL/CSA/IEC 61010-1, NFPA 70 (NEC) EN60204-1, EN292-2, EN50081-1, EN50082-2 Cabinet ventilated per NFPA69 and EN1127-1, CI 6.2