10kW Fuel Cell UPS for North American Telecoms Operators

Fuel Cells offer a number of advantages over existing technologies for UPS / Backup Power Applications. M-Field Energy Ltd has developed a 10kW hydrogen fuel cell system design to meet the demands of North American telecom operators. We are looking for partners for trial and demonstration programs in North America.

Partners

  • Telecoms Operators
  • Telecoms OEMS
  • Government funding organisations
  • End users of Backup power

Applications

  • Base Stations
  • Antenna Sites
  • Critical communications / power
  • Office IT Security
  • Emergency signalling

Why Fuel Cells?

  • Higher Energy Efficiency Fuel cells generate electricity through an electrochemical reaction. Because this is a relatively simple energy conversion processes and involves relatively few moving parts (particularly when compared to an internal combustion engine), fuel cells are typically 35% to 55% efficient. Internal-combustion-engine generators are typically 20%~30% energy efficiency. It is also important to note that the fuel cells efficiency is constant across variable loads and voltage does not degrade.
  • Clean and Eco-Friendly At the point where the fuel cell generates electricity the only emission is water. When using hydrogen generated from renewable energy it is possible for the energy created to effectively be carbon neutral. With no CO2, NOx or particulates generated by the fuel cell, users can enjoy clean energy with minimal environmental impact.
  • Installation Simplicity and Operating Stability - Fuel Cells produce minimal vibrations and noise during operation and require less maintenance than traditional generator technologies (e.g, no oil changes). When compared to batteries, fuels cells require less space and can provide longer autonomy. Unlike renewables, Fuel cells can operate 24 hours / 365 days a year in almost any climate and latitude, allowing them to be installed in both indoor and outdoor locations. In UPS applications there is not the 10% loss in energy associated with battery solutions.

Product Specifications

MF-UTH Series
Specifications
Product description Uninterruptible Power Supply Location Indoor (Outdoor Design is also available)
Power Output(customized) 1­10KVA Application Telecom Base Station, Data Center, RTR sites,
RCLR Site, RCAG Site, Bank, and etc.
Input Voltage 220 VAC, 60Hz (Can be customized)
Fuel Purity Hydrogen, >99.99% MF-UTH-10
Fuel Pressure 500­600Kpa (73­87Psi) Special Figures
Ethernet Data Collection Available Power Output(Maximum) 10KVA (DC 5KVA & AC 5KVA)
Language English/Chinese Dimensions 129 x 60 x 162 cm (51 x 24 x 64 in)
System Start-up time 0 sec Cooling System Radiator (Heat Exchanger also available)
Peak Efficiency 40% Hydrogen Consumption 752 Liter / kWh
Ambient Temperature Range -40C­40C Noise < 65 dB
Contact Us
Contact Us

Respond and form a relationship with M-Field Energy LTD
Related Portal Pages
Follow these links to find related information

Fuel Cell Testing Equipment & Development
Hydrogen H2
Stationary Power Applications
Fuel Cell Type
Fuel Cell Backup Power
PEMFC - Proton Exchange Membrane (PEM) Fuel Cells
Stationary Fuel Cell Battery Chargers
Uninterruptible Power Supply (UPS)


Contact UsContact Us
Respond and form a relationship with M-Field Energy LTD


Forward this ArticleEmail this Page
Forward this page to a friend or colleague





Return to Fuel Cell Markets
Previous Page   Previous Page
Copyright © 2002-2014 M-Field Energy LTD
Terms & Conditions
 Back to Top    Back to Top